￥200.6 M+
registered capital
￥200.6 M+
registered capital
100,000 ㎡+
Factory floor area
20000 units+
Annual production capacity of elevators
Company profile
Jiangsu Xide Elevator Co., Ltd. is located in the beautiful coastal city of Lianyungang, Jiangsu, China, specifically in the Ganyu High-tech Zone. Established in 2010, the company covers an area of 118 acres, with research, design, manufacturing, and production buildings totaling 43,900 square meters. The test tower stands at a height of 108 meters and features four test elevator shafts, including an ultra-high-speed elevator with a speed of 8 m/s and a 4 m/s panoramic elevator, meeting the inspection and testing requirements for elevator production.
Jiangsu Xide Elevator holds an A1-grade elevator production license issued by the State Administration for Market Regulation of China. The company specializes in the research, design, manufacturing, sales, installation, and maintenance of various elevator products, including passenger elevators, home elevators, freight elevators, panoramic elevators, and escalators, catering to the customized needs of customers.
The company has obtained ISO9001:2015 Quality Management System Certification, ISO14001:2015 Environmental Management System Certification, and ISO45001:2018 Occupational Health and Safety Management System Certification. It has also received certifications such as China's High-tech Enterprise Certification and the National Comfortable Housing Project Certificate. In 2023, the testing center of Jiangsu Xide Elevator was awarded the CNAS (China National Accreditation Service for Conformity Assessment) laboratory accreditation certificate. In recent years, Jiangsu Xide Elevator has been recognized with several honors, including Jiangsu Province Service-oriented Manufacturing Enterprise, Jiangsu Province Specialized and New Small and Medium-sized Enterprise, Jiangsu Province Credit Management Demonstration Enterprise, Jiangsu Province Quality Benchmark Enterprise, and the Lianyungang Mayor's Quality Award. Additionally, the company's elevator control system has received EU CE and TUV elevator energy efficiency Class A certification.
As a specialized and internationally-oriented elevator manufacturer, Jiangsu Xide Elevator is committed to providing high-quality, comprehensive elevator products and services to customers. In recent years, the company has successfully established sales channels in the Middle East, Central Asia, South Asia, Southeast Asia, Eastern Europe, and Africa, achieving a breakthrough in global market sales. Jiangsu Xide Elevator adheres to the business philosophy of "I won’t sell the future for a short term profit." dedicated to offering customers high-quality and cost-effective elevator products and services, continuously enhancing and expanding technical standards in the elevator industry, and leading the way towards new development directions.
Smart can assign
Modern large manufacturing workshop, construction area of more than 40,000 square meters. It has 4 machinery manufacturing workshops, 1 Siemens original imported parts library, 1 electrical workshop, 1 electrophoresis workshop, 1 automatic spraying workshop, 1 indoor and 1 outdoor delivery workshop. All kinds of large-scale production equipment more than 300 sets, intelligent manufacturing equipment in the industry leading, the realization of elevator machine, parts production and related supporting manufacturing.
Innovative talent mechanism
Pooling development momentum
Staff, is the most valuable wealth of West Germany elevator. The company attaches great importance to personnel training and actively introduces scientific and managerial talents. The innovation spirit, technical level, work ability and teamwork consciousness of employees are the biggest guarantee for the core competitiveness of the enterprise.
The company has a strong R & D ability of the engineer team, experienced technical team and modern enterprise management ability of senior management talent team, laid a solid foundation for the development of the enterprise.
Our elevator products are higher than the national standard content (elevator part)
| Num | GB7588, gauge, type gauge and GB10060 requirements | Design requirements of our company | |
|---|---|---|---|
| 1 | Energy storage polyurethane buffer can be used for passenger elevators with speed not greater than 1.0 | All our passenger elevators are equipped with energy-consuming oil buffer | |
| 2 | The span of guide bracket shall not be greater than 2.5 meters | The span of guide bracket shall not be greater than 2.0 meters | |
| 3 | No personal safety protection is required for the return rope wheel under the car | All our elevator car bottom return rope wheel has a protective cover | |
| 4 | There are no fire resistance requirements for elevator doors | Our company can provide the fire resistance requirements of the Ministry of Public Security | Standard GB27903 |
| 5 | The minimum thickness of laminated tempered glass sedan chair wall in GB is 5+0.76+5 | The minimum thickness of laminated tempered glass sedan chair wall is 6+0.76+6 | |
| 6 | The gap between car door and hall door should be at least 35MM | Our company according to 30MM design | |
| 7 | The national standard has no requirements on the type of guide boots | Sightseeing ladders and lifts greater than 2.0m/s are equipped with rolling guide boots | |
| 8 | The bottom requirement for heavy guardrail national standard can be mesh type | Our standard configuration is non-hole type | |
| 9 | The standard has no requirement for screw strength, as long as it meets the mechanical design requirements | Our screws are not 4.8 grade black, all are not less than 8.8 grade galvanized type | |
| 10 | The National standard requires that the car roof guardrail should be added only when the outside of the car reaches more than 300 to the well wall. | All elevators of our company have guardrail, and the height is not less than 720 | |
| 11 | The national standard requires that the diameter of the traction wheel is at least 40 times that of the wire rope | Our 1.5m/s above the elevator rope wheel ratio is 50-61 times | |
| 12 | The weight guardrail shall be set between the car and the weight | Our company adds the setting of the heavy side, when the gap between the heavy guide rail and the well wall is greater than 300, add the protection requirements | |
| 13 | Standard for layer door strength requirements: 300N static test: Maximum elastic deformation: 15mm Maximum permanent deformation: 1.0mm 1000N static test: Maximum clearance: 10mm Maximum clearance after convex passage in the gate impact test: 120mm |
Our company's floor door strength report measurement: 300N static test: Maximum elastic deformation: 9.95mm Maximum permanent deformation: 0.15mm 1000N static test: Maximum door clearance: 6.40mm Maximum clearance after convex passage in the gate impact test: 75mm Well above standard requirements |
|
| 14 | The standard requires a compensation chain to be added to lift heights greater than 30m | Part of our ladder from 15 meters to increase | |
| 15 | The standard has no special requirements for decorative top plate and lamp source | Our AC vertical plate is flame-proof type, the lamp source is LED energy saving type | |
| 16 | The standard has no requirement on the structure of the compensation chain | Our company is equipped with plastic coated compensation chain for elevators larger than 1.75m/s, and ordinary compensation chain for elevators below 1.75m/s | |
| 17 | There is no Braille touch requirement for the HOP@COP button | Our HOP@COP button with Braille touch | |
| 18 | At rated speed (V≤2.5m/s), the average noise value in the room is ≤80 | Our company designed the rated speed (V≤2.5m/s) when the average noise value in the room is less than or equal to 60 | |
| 19 | (V≤2.5m/s) The maximum noise in the car during operation is ≤55 | Our design (V≤2.5m/s) in operation, the maximum noise value in the car is less than 45 | |
| 20 | The balance coefficient of traction elevator should be in the range of 0.4 ~ 0.5 | Our design requires that the balance coefficient of the traction elevator should be in the range of 0.46 ~ 0.48 | |
| 21 | When the elevator runs independently of the phase sequence, the wrong phase protection device may not be set | Our company standard configuration of phase sequence device, with the power supply system phase break, misphase protection function | |
| 22 | Protection device when exceeding the upper and lower limit working position | Our company standard equipped with the protection device when exceeding the upper and lower limit working position and the protection device when exceeding the upper and lower limit working position, with high and reliable dual protection function | |
| 23 | The accuracy of the flat floor of the elevator car should be within the range of ±10mm. The accuracy of the flat layer should be within ±20mm | Our company standard optical level layer device, elevator car flat floor accuracy to reach within the range of ±3mm, flat floor accuracy should be within the range of ±10mm | |
| 24 | The A95 peak-to-peak value of the vertical (Z-axis) vibration of the passenger elevator car running in the constant acceleration region should not be greater than 0.2m/s2 | The A95 peak-to-peak value of the vertical (Z-axis) vibration of the passenger elevator car running in the constant acceleration region should not be greater than 0.15m/s2 | |
| 25 | The A95 peak-to-peak vibration of the passenger elevator car during operation (X and Y axis) should not be greater than 0.15m/s2 | The A95 peak-to-peak vibration of the passenger elevator car during operation (X and Y axis) should not be greater than 0.10m/s2 |
Address:100-9 Shengshi Road, Ganyu Marine Economic Development Zone, Lianyungang, Jiangsu Province, China
Phone/Tel:0518-80200888
Phone/Tel:0518-86201699
